Find a flat surface such as a work bench or kitchen table to assemble the apron component on. It’s good to dry fit, or pre assemble the table before you apply glue to any of the joints.
Assemble one apron end and one apron side so you can insert the oak (best side facing the interior) plywood into the apron grove.
Add the other apron end; finish up adding the other apron side. Sparingly spread some
glue on the apron on each end joint and reassemble Place a bar clamp to pull the apron
joints tight. If any glue squeezed out, be sure to wipe all of the glue off with a damp
cloth.
Let dry and sand apron joints flush.
