The legs are attached to the apron end. Each end apron has three
counter sunk holes on the inside. Center the leg in the middle of the
apron by measuring from both sides to make sure they are equal. With the
top of the leg flush with the top of the apron end, screw in the three
screws. Measure again to make sure the leg is centered on the apron end.
Remove the screws. Sparingly spread some glue on the apron end and attach
the leg with three screws. If any glue squeezed out, be sure to wipe all
of the glue off with a damp cloth. Apply glue the the out side of
the wood plugs and insert the plugs into the counter sunk holes. Let dry
and sand plugs flush.
