Find a flat surface such as a work bench or kitchen table to assemble
the apron component on. It?s good to dry fit, or pre assemble the table
before you apply glue to any of the joints. Assemble one apron end and one
apron side so you can insert the oak (best side facing the interior)
plywood into the apron grove. Add the other apron end; finish up adding
the other apron side. Sparingly spread some glue on the apron on each end
joint and reassemble Place a bar clamp to pull the apron joints tight. If
any glue squeezed out, be sure to wipe all of the glue off with a damp
cloth.
Let dry and sand apron joints flush.
