Tools needed: Tape measure, 1/2 inch wrench, Philips head screw driver, a square,
clamps, hammer, nail set and a sanding block or power sander. No clamps are needed for
this project.
Card Table Assembly Instructions |
|
Tools Needed Tools needed: Tape measure, 1/2 inch wrench, Philips head screw driver, a square,
clamps, hammer, nail set and a sanding block or power sander. No clamps are needed for
this project.
|
Previous
Next| | Home | Frequently Asked Questions | Products | Purchase | Checkout | Woods | Contact Us | |
 |