The four table legs already have the dowel screws mounted. Remove the protective materials to expose the threads.
Sand the center pedestal and the four legs before assembling.
In the hardware bag, find eight washers and eight nuts.
This is one of the more trickier items to get to work. With the center pedestal upside down, place the leg into the holes. If you know the secrete, then its easy. The secrete is to double over some masking tape and place it on your finger tip. Touch a washer with the masking tape and place it on the dowel screw. Now do the same with the nut. tighten the nuts with a 1/2 wrench. Do the same for the three remaining legs.
