Hall Tree Assembly Instructions

The front frame has a top piece, a center style and lower piece.

The top center frame piece has a front apron which has the upper shelf screwed to it. Attach the two side moldings with screws next. The side apron pieces now can be slid into place.

The lower center frame piece has a front apron which has two lower shelves screwed to it. The side apron pieces now can be slid into place and attached with screws.

Assemble the front frame by placing the center vertical style between the top piece and lower piece. Now put the four side pieces (two right and two left) into the back frame.  

Place the two box side supports into the center (one right and one left) into the back frame. Now carefully place the front frame assembly onto the 4 front frame supports. If any of the pieces don’t fit into the mortise (slots), sand the tenons with 100-grit sandpaper wrapped around a small block of block of wood. You may want to sand the all the joints smooth.

Next, attach the  bracket feet. Inset the bracket foot 1/4 inch on the front and side Each bracket foot comes preassembled with a front and side with an interlocking joint.