Flat Shelf Table - Instructions

01. Verify You have the Parts:

Please check to make sure you have all the parts which match this picture. If you do not, then please contact us at Abbey Bay. Sand all of the parts with 120 grit sand paper.

02. Attach the Mounting Brackets:

Attach the top and shelf mounting brackets to each of the legs. The important part is to be sure the counter sunk hole are facing downward. When looking at the mounting brackets from the top, you should only see 1/8 holes.

03. Install the Shelf:

Make sure the shelf is centered on the shelf bracket and attach with screws.

04. Center the Sides of the Base with the Top:

Measure the distance from each side to make sure the base is centered on the table top.

05. Center the Ends of the Base with the Top:

Measure the distance from each end to make sure the base is centered on the table top.

06. Final Sanding:

Sand the entire assembled Flat Shelf Bookcase with 120 grit sand paper.

07. Apply the finish of your choice.